Latest messages

Hi; no, unfortunately you can't. Both boards are slightly different. You want to use the BSPs found on your DVD. There are 4 BSBs avail able for the Sky2440, WinCE 5.0 and WinCE 6.0 both versions for 64MB SDRam and 128MB SDRam Hope I could help Sven

Hi Everybody I am developing a project in which I want to port uCLinux on an embedded board and provide it a GUI layer using QT-embedded. Actually my board is consist of an ARM processor and a touchscreen and I have made this board. I have ported the embedded uClinux on the board and want to provide it a GUI look to it . I want to display various gui widgets like buttons , scrollbars etc . So , how can I make it to talk to the uClinux kernel, I mean how can I interface it to the kernel. Thank you

Hi I want to download the source code of "linux-2.6.13-mini2440-20080910.tgz" . can anybody of you provide me the Link. Thank you

can I use this software for sky2440v2 and can you please reupload the images for CE6.0 because I have a "file not found" problem with the links above

there is an error with link: http://www.developmentboard.net/ressources/mini2440v2/mini2440v2_CE6.0_SDK.tar.gz file not found, con you please re-upload it

Can I install this distibution of WinCE 6.0 onto my Sky2440v2 board?

dvd gps automotivo MESADA_2440 Windows CE 5.00 40.7 MB RAM S3C2440A ARM920T (385MHZ) 480x234 pixels 65536 colors Can you please email me the link to the firmware leandro.pauly@hotmail.com the gps it not work, when i started gps, freezing to start page what can i do ? please help me how can i format it and loading wince again this video link have a problem: http://www.youtube.com/watch?v=0sH1GHodvvw the GPS'S MACHINE is stopped on the screen openning!!! not processed to the menu this http://i50.tinypic.com/3008ggj.jpg

I still have the same problem too. This link doesn't work for me. The 2440 Manual pdf in my CD have been corrupted, where can i download them ?.

I have severals boards MINI2440v2. And i just install my linux kernel and fs that i used on the friendlyarm boards. Everything seans to work fine, except the i2c bus. I'm getting an error 110 (timeout) when trying to acess the bus. DO the mini2440v2 needs any twiking on the kernel, to acess the i2c bus ?

Hi shufexiu, Thanks for the link, but our O-Link adapter has a VID=1366, and PID = 0101, which doesn't match the .inf files supplied. Windows recognises it as a J-Link device, and a J-Link driver was supplied on the CD, however the J-Link isn't recognised by OpenOCD. Are we missing something? Regards, Lee