The MINI2440v2 is available NOW!

 In the last two years we have been proud of the MINI2440, the most popular ARM9 based board that drew and is drawing the most attention from engineers, cooperations, students... Now, as we always say, "Being a market leader in ARM9 boards doesn't mean we should not improve our products.", we are proud to annouce that we have improved the fantastic MINI2440 to an even better level and we are ready to introduce the MINI2440v2!

Compared to the classic MINI2440, the MINI2440v2 is improved in both Hardware experience and Software performance.

 On the hardware part,

      • the adjusted hardware design on the MINI2440v2 makes it easy to change components, like the Flash, SDram, displays, etc.;

      • reported "weak" components like the I2C is now better supported in HW;

      • A “clever” display adapter is now implemented, to which additional devices can be connected easily;

      • More add-on cards are to be developed;

      • While most components and the form factor remain the same with those on the MINI2440

 

On the software part,

      • Ångström is implemented as the official Linux distributon for the MINI2440v2;

      • WinC5.0 available now

      • WinCE6.0 is now being developed and will be available soon

Product Specification

Specification	MINI2440v2
CPU	S3C2440A
MHz	400-533
RAM	64MB
NOR flash	2MB
Nand Flash	128MB
Ethernet	10/100M Ethernet, RJ-45 connector
Serial ports	3
RS232	1
USB Host	1
USB Device	1
SD card slot	1
Audio Interface	In, Out, Mic
LCD connector	1
Camera Interface	1
JTAG	10pin JTAG connector
Bus	40pin connector
GPIO	34pin connector
Dimension	100x100mm
Linux	Open Embeddeed with Ångström
WinCE	WinCE 5.0
Cost	€69