The VGA2410 development board has a modular design splitted into a four layer Core Board and a two layer Application Board. The SAMSUNG S3C2410A micro controller is located on the core board together with SDRAM, NAND Flash Audio and 10MBit Ethernet. It is very easy for the users to develop their own products by simply tailoring the Application Board. Due to the maturation and high reliability of CPU and thousands of times proved stability of the Core and Application board, this is the ideal choice for user input output controller or Terminal controller.

 

 

VGA2410 at a glance

 

Processor:

SAMSUNG S3C2410A up to 200MHz

 

 

Memory:
SDRAM:64MB
NAND Flash: 64MB, (K9F1208, can be replaced by other types of 16M, 32M, or 128M)

 

 

Network interface:

One 10M network interface, CS8900CQ3 chip, with Link and Receiving indicators

 

 

USB interfaces:

Two USB1.1 Host interfaces
One USB1.1 Device interface

 

 

Audio:

The I²S interface chip UDA1341 supports
one stereo audio output interface,
one MIC interface
 

Storage interface:

One SD card interface
One IDE interface, PATA/EIDE hard disks or CD

 

 

Touch screen interface:

4-wire resistance touch screen interface

 

 

Video output:

One VGA interface, through which the VGA comp. display can be connected directly
One TV interface, through which PAL and NTSC CTRs can be connected directly
One LCD Connector

 

 

PS2 interface:

One PS2 keyboard interface

 

 

JTAG:

One 20pin standard Multi-Ice JTAG interface

 

 

Misc. interfaces :

One 40pin connector works as expansion port, draws out the IIC BUS, SPI BUS, the five AD outputs, the unused GPIO ports and the external interrupts lines.
One 20pin connector draws out all the address lines and control lines needed to emulate a standard IDE/ATAPI/PATA port.

 

 

Dimension: 148mm x 110mm

 

 

Power interface:

5V power supply, with switch and status lights

 

 

Software:

VIVI bootloader as executable and source files, which supports network download.
image of the Linux OS kernel(2.4.18) with the yaffs file system included, and the source codes
Root file system in “yaffs” format and in “cramfs” format, and the user definable binary packages.
QTOPIA graphic system in “yaffs” format and in “cramfs” format, and the user definable binary packages.
Test programms for the PS2 keyboard connector
Wince 4.2 image and Wince 4.2 BSP source code
Cross compiler for Linux
Schematics of the core board and the Application board
User's manual
Other tools that might be useful for the development.

 

 

Enclosure list:

One VGA2410 core board
One VGA2410 application board
One WIGGLER JTAG board (50cm 20pin cable)
One 5V power source (not for all countries available, please ask us)
One serial port extension line One ethernet cable(cross-over or direct connected)
One CD