The TenByTen6410 offers ARM11 power on 10x10cm for Windows CE.
|100 quantities||500 quantities||1000 quantities|
The TenByTen6410 is a high performance ARM11 single board computer specially designed for consumer electronics, hand-held devices, industrial control equipment, vehicle navigation devices, etc. It features exactly the same dimensions as the popular MINI2440V2 from Hiteg Ltd. and can therefore be used as a drop-in replacement.
USB control provides your TenByTen6410 the unique ability to control the USB host 5V power line, which feeds connected devices; thus, if attached devices are not responding, you now have the ability to restart them. This is extremely useful for G3, Bluetooth, or GSM modems in a 24/7 environment. Secondly, you can save energy by disabling currently unneeded devices and therefore save up to 500mA!
LCD control enables you to switch off the display at any given time. In this way, you can save up all that precious energy. Save up to 700mA!
Ethernet control enables you to take the TenByTen6410 entirely off the net. If your applicaion doesn't need Ethernet at all and you would like to prevent the user from messing with it, then simply switch ethernet off in the boot loader section, and the OS doesn't even know that there is an ethernet chip in the first place!
SD control gives you the power over all attached SDIO devices on port 1. Whether it is our SD WiFi module, our internal SD-card module, or your very own module, you may easily and efficiently control its power.
The TenByTen6410 SBC is based on the Samsung S3C6410 ARM11 micro controller, which provides the TenByTen6410 with abundant internal resources and a powerful video processing capacity operating at a 667MHz (up to 900MHz) peak frequency. Beside its powerful processor, the TenByTen6410 is also equipped with 256MB mobileDDR RAM, 1GB MLC NAND Flash, as well as some common external interfaces like USB, UART, SD, LCD, Camera, audio, ethernet, etc., making the TenByTen6410 full featured and easy to use SBC. With its vigorous internal resources andcapacity for 2D/3D processing, the TenByTen6410 is fully competent for various kinds of hand-held devices, consumer electronics, industrial controllers.
The TenByTen6410 uses a reliable 8-layer PCB measuring 100mm by 100mm, it is designed and produced in strict accordance with UL and CE standards, with full consideration of signal integrity, electrostatic protection and electromagnetic compatibility to assure that the TenByTen6410 is capable of working in various environments. Hiteg Ltd. will provide an industrial temperature range version of the TenByTen6410 upon request.
On the software part
The TenByTen6410 supports a wide diversity of operating systems WinCE 6 and WinCE7 (soon) and several Linux distributions. Together with the TenByTen6410 we provide full featured BSPs WinCE6R3, WinCE 7 (on request). The BSPs provide device drivers for all the low-level interfaces.
The TenByTen6410 is carefully designed to fit perfectly into any enclosure designed for the MINI2440v2.
The maximum reachable ARM Clock is 900MHz with 150MHz RAM Clock.
Unleash the power of the TenByTen6410
The TenByTen6410 is a power house, no question.
Install WinCE6R3 to NAND Flash
A detailed, step-by-step tutorial in how to install WinCE6R3 from a SD-Card to SLC and MLC NAND
Debian Bootstrap for ARMEL
Explains how to setup and build a debian distribution for ARMEL CPUs, like SAMSUNGS S3C2440 as found on the MINI2440 as well as for SAMSUNGs S3C6410 SOC found on Hitegs TenByTen6410
Assembling the MINI2440 or TenByTen6410 board into the Plastic Enclosure for MegaDisplay 7S
Instructions on how to assemble the MINI2440, MINI2440v2, or TenByTen6410 into Hiteg's Plastic Enclosure for MegaDisplay 7S
Proper usage of a touchscreen connector
A step-by-step tutorial instructing you how to properly connect a touchscreen's 4pin cable into its display controller PCB's connector.
Proper usage of an LCD connector
A detailed article instructing you how to properly connect an FFC into an LCD connector with the necessary precautions to take.