The TenByTen6410 is a high performance ARM11 single board computer specially designed for consumer electronics, industrial control equipment. It features exactly the same dimensions and footprint as the popular MINI2440V2 from Hiteg Ltd. and can therefore be used as a drop-in replacement for existing projects where more CPU power are needed. 

With the TenByTen6410 you can offer your customers a choice between two of your products. The MINI2440 for minimal comfort and abilities and the TenByTen6410 with high comfort and astounding visuals. And as the TenByTen6410 is a drop-in replacement you don't even have to change much to make that work. You can use any housing which fits for the MINI2440 and use it for the TenByTen6410, or vice versa. Our very own plastic enclosure for 7inch shows this ability.   


USB control provides your TenByTen6410 the unique ability to control the USB host 5V power line, which feeds connected devices; thus, if attached devices are not responding, you now have the ability to restart them. This is extremely useful for G3, Bluetooth, or GSM modems in a 24/7 environment. Secondly, you can save energy by disabling currently unneeded devices and therefore save up to 500mA!


LCD control enables you to switch off the display at any given time. In this way, you can save up all that precious energy. Save up to 700mA!


Ethernet control enables you to take the TenByTen6410 entirely off the net. If your applicaion doesn't need Ethernet at all and you would like to prevent the user from messing with it, then simply switch ethernet off in the boot loader section, and the OS doesn't even know that there is an ethernet chip in the first place!


SD control gives you the power over all attached SDIO devices on port 1. Whether it is our SD WiFi module, our internal SD-card module, or your very own module, you may easily and efficiently control its power.


CVBS / S-Video control enables you to switch the video amplifier completely off. This feature is extremely useful if you have to connect devices with an auto-sensing feature to the TenByTen6410. In the "OFF" state, absolutely no signal reaches the device, thus auto-sensing will find nothing and therefore no disturbing actions will occur. This is useful if more than one source is connected to a screen, or similar device.


The TenByTen6410 SBC is based on the Samsung S3C6410 ARM11 micro controller, which provides the TenByTen6410 with abundant internal resources and a powerful video processing capacity operating at a 667MHz (optional 800MHz) peak frequency. Beside its powerful processor, the TenByTen6410 is also equipped with 256MB mobileDDR RAM, 256MB/1GB (SLC/MLC) NAND Flash, as well as some common external interfaces like USB, UART, SD, LCD, Camera, audio, ethernet, etc., making the TenByTen6410 full featured and easy to use SBC. With its vigorous internal resources and excellent capacity for 3D video processing, the TenByTen6410 is fully competent for various kinds of hand-held devices, consumer electronics, industrial controllers, Mobile Internet Devices, Notebooks, etc.

The TenByTen6410 uses a reliable 8-layer PCB measuring 100mm by 100mm, it is designed and produced in strict accordance with UL and CE standards, with full consideration of signal integrity, electrostatic protection and electromagnetic compatibility to assure that the TenByTen6410 is capable of working in various environments. Hiteg Ltd. will provide an industrial temperature range version of the TenByTen6410 upon request.

On the software part
The TenByTen6410 supports a wide diversity of operating systems, such as Android, WinCE and several other Linux distributions.  Together with the TenByTen6410 we provide full featured BSPs WinCE6R3. WinCE 7 (soon) and Linux (eBoot and Kernel). The BSPs provide device drivers for all the low-level interfaces.

The TenByTen6410 is carefully designed to fit perfectly into any enclosure designed for the MINI2440v2. 

Includes